L Shaped Desks – Common Myths


There are quite a few myths that come along with owning, or purchasing an L shape desk. This is especially true when you are having one built from your own design, or are even purchasing the desk over the internet without seeing it before you actually place the order. Some of the more common myths are listed below, with reasons to exactly why they are only a myth, and not the true reality of buying and owning an L shape desk.

Myth #1) Expensive To Have Designed & Built – When you think about contacting a local craftsman to have your desk designed and built, you may think that it is going to cost a large amount of money. The fact is that these types of desks require small amounts of materials, so you are not going to be spending near as much as you would initially think. The amount of work that goes into an L shaped desk is also minimal when compared to other projects, so you will not be taken to the cleaners in the cost of labor, either.

Myth #2) Requires A Large Amount Of Floor Space – L shape desks actually take up less floor space than most executive desks. Their design helps to utilize the most amount of space available, by providing you increased work space, as well as a layout that makes it easy to utilize the entire desk. When compared to other desk layouts, an L shape desk speaks for itself in terms of usability.

Myth #3) Wood Is The Only Material Available – While you are ordering you may also think that wood is the only material that you can have your desk built from, or find available for ordering. This simply isn’t true. With advances in manufacturing processes over the last 20 years, you can literally find desks available in almost any material you can imagine. From glass, to metal, and even some plastic desks, the options that you have are almost endless.

Myth #4) L Shape Desks Are Expensive To Order – This greatly depends on the size of the desk that you are planning on ordering. What typically happens is that the larger, more expensive desks that you would think are expensive to ship are actually free to ship because the company is making more off of you purchasing the desk than it would cost them to pay for shipping it to your house.  Also, you could opt to have your desk come without the standard corner hutch cabinet

Posted in Articles | Tagged , , , , , , , | Leave a comment

How To Build An L Shape Desk – Part 2


Step #4) After you have fastened the 1” x 8” board to the plywood sections, and have created the L shape of your desk, you will need to install the legs of the desk. You can purchase desk legs from the internet for around $20 per set of two. You will want at least 5 legs underneath your desk. Two on both sides of the L shape, as well as one more behind where you installed the 1” x 8” joining bracket.

Step #5) Once you have installed the legs for your desk it is now time to begin painting the unit. With a heavy duty epoxy or oil based paint, add on the first coat. Make sure that you cover every square inch of the desk to avoid any paint peeling or chipping off later. After the first coat has had sufficient amount of time to dry, you will need to put down two more coats to complete the paint finish. Three thick coats will give you a durable finish that will last for many years to come.

Step #6) After the paint coats have cured, you will need to install the trim around the outside edges of the plywood, to help prevent any splinters or rough edges. The most common type of trim used is 1” quarter round. This will create a rounded, or bevelled edge that will prevent your arms from getting rubbed raw, while also prevent damage to your chair when it bumps into the desk. Use finishing nails to attach the trim to the plywood, to avoid splitting the quarter round while also making sure that you can hide the nails later on.

Step #7) Once you have installed the trim you will need to give it the first coat of paint. This first coat is going to soak into the wood, much in the same manner as what happened during step #5, so you will need to plan on going over it again at least 2 more times. Take your time while applying the first coat to make sure that you do not create any runs or drips on the desk, or create thicker areas on the plywood where you have already painted. Once the first coat is dried, add two more additional coats and give them ample amount of time to cure.

Now that you have painted the desk, and have the legs installed, you can place the desk into your home office and begin enjoying the fruits of your hard labor.

Posted in Articles | Tagged , , , , , , , , , | Leave a comment